|
Organic
Water Treatment Chemicals
Steam Boilers, Cooling Towers,
Hot And Chilled Closed Systems
Fuel Oil Treatment
(Home of D.M Concentrate)
Boiler
Water Scale Inhibitor, Oxygen
Scavenger, Corrosion, Inhibitor
C.C.S 801
407-801
PRODUCT
USES:
Thermidaire
C.C.S 801 is based on a
blend of organic and sequestering
agents and sodium salts. is
a corrosion inhibitor and scale
preventative synergized by organic
sequestering and dispersing
agents specially formulated
for boilers systems and all
types of internal combustion
engines, diesel, gasoline, gas,
etc., hot water radiators.
Thermidaire C.C.S 801
absolute protection against
all types of corrosion. (a)
Oxygen. (b) Acidic. (c)
Electrolytic. (d) Galvanic.
(Stops up to 2 volts potential
of electricity.)
Thermidaire C.C.S 801 brings
all types of corrosion to a
stop. It rapidly seals off all
corrosion susceptible metal
surface, with an inert tannate
sheen (no thermal insulation)
against further corrosion
Thermidaire C.C.S 801
affords absolute protection
against all waters regardless
of their varying properties.
Thermidaire C.C.S 801
protects water pump packing,
seal rings.
DESCRIPTION:
Physical State: Liquid
Colour: Dark Brown
BENEFITS:
Liquid product for ease of use
On-site control test available
Prevents scale deposit in all
types of water regardless of
their varying properties
Absolute protection against
all types of corrosion. On site
tests allow correct monitoring.
DOSAGE:
The correct treatment level
depends on the operating conditions
such as: pH, temperature, and
concentration factor of the
hot water, and the mechanical
design of the system Thermidaire
C.C.S 801 is tested by the
pH level of the water (between
8.5 and 9.0).
Thermidaire Corporation will
specify the optimum treatment
level for any plant.
Initial dosage: 1 gallon
of C.C.S.H. for 500 gallons
of water in the system (until
pH reaches a 8.5 - 9.0 level)
Continuing dosage: to
maintain the pH reading within
a range of 8.5 - 9.0.
FEEDING:
Thermidaire C.C.S 801
can be introduced into the system
directly or through a pot feeder.
HANDLING:
Non-hazardous material,
although care should be taken
as with all other industrial
chemicals. Could cause akin
discolouration
Avoid breathing mist, avoid
contact with clothing, eyes
and skin, should contact occur,
flush immediately with plenty
of fresh water. If discomfort
persists, seek medical attention.
Do not take internally. Wear
protective clothing, safety
shoes, glasses, goggles keep
out of ignition sources. Store
in a cool, dry and well-ventilated
places. Keep container tightly
closed. Avoid contact with oxidizers.
Wash thoroughly after handling.
Consult the Material Safety
Data Sheet before handling this
product and for complete handling
and storage information.
SPILL PROCEDURES:
For small spills wipe out and
dispose in waste containers.
For large spills contain by
diking with soil or other non-combustible
absorbents and dispose in waste
containers. Keep out of sewers,
surface waters, and soil. Local
effluent regulations must be
observed.
PACKAGING:
Thermidaire C.C.S 801
is packaged in none-refundable
5 gallons pails and 45 gallons
drums.
|