PRODUCT USES:

Thermidaire Clstreat 401 Unique combination of organic inhibitors, nitrite and dispersants blend provides excellent corrosion, and scale protection Non-Chlorine Compatible, Soft water only.
Thermidaire Clstreat 401 Designed for use in closed recirculating hot and chilled water systems operating at low, medium, and high temperature providing excellent and complete protection to ferrous and non-ferrous metals while acting at the same time to increase the solubility of scale forming aliments.
Thermidaire Clstreat 401 Inhibitor specifically designed to control, pitting, galvanic action, corrosion, and scale formation where dissimilar metals may be present.
Thermidaire Clstreat 401 Compatible with most corrosion inhibitors, antifreeze solutions, and alcohol.

DESCRIPTION:

Physical state: Liquid
Colour: Brown

ADVANTAGES:

Easy to handle and apply.
Controls corrosion of both ferrous and non-ferrous metals.
Compatible with most corrosion inhibitors, antifreeze solutions, and alcohol.
Colourless, non-staining
Scale control agent
Low cost treatment

DOSAGES:

The treatment should be used in sufficient quantity to maintain 65 PPM as Nitrite. Feed rate is 50 lb. / 1000 gallons system volume. Adjustments in dosages can be made on the basis of plant analyses performed with simple test equipment. Consult Your Thermidaire Water Treatment consultant for the proper dosage.

FEEDING:

Thermidaire Clstreat 401 can be introduced into the system directly or through a pot feeder.

HANDLING:

Thermidaire Clstreat 401 Not regulated, relatively mild material, avoid contact with eyes and skin, should contact occur, flush with water. If discomfort persists, seek medical attention. Do not take internally. Do not freeze, Store at moderate temperature. Keep container closed.

Read Material Safety Data Sheet for detailed handling and storage precautions.

PACKAGING:

Thermidaire Clstreat 401 is packaged in 5 gallons pails, 45 gallons drums