Products Menu       
FAQ Site Map Search Tools
Environment FriendlyAsk ExpertsABChemicals

  Product Information    


Organic Water Treatment Chemicals
Steam Boilers, Cooling Towers, Hot And Chilled Closed Systems
Fuel Oil Treatment
(Home of D.M Concentrate)

COOLING TOWERS SCALE AND CORROSION INHIBITOR
Coltreat 304
300-304

PRODUCT USES:

Thermidaire Coltreat 304
Unique combination of scale, corrosion inhibitors, and dispersants blend, provides excellent corrosion, and scale protection for cooling towers.
Thermidaire Coltreat 304
has been utilised to control a variety of different scale species such as calcium carbonate, calcium sulfate, and calcium phosphate; it is particularly effective for the carbonate species.
Thermidaire Coltreat 304 provides dispersant properties to control suspended solids, shows good stability over many water quality conditions, particularly under a wide variation of hardness, pH, alkalinity, and temperature,
Thermidaire Coltreat 304 designed to provide multi metal with excellent corrosion protection while maintaining clean heat transfer, acting at the same time to increase the solubility of scale forming aliments.
Thermidaire Coltreat 304 Inhibitor specifically designed to control corrosion, and scale formation where dissimilar metals may be present.

DESCRIPTION:

Physical state: Liquid
Colour: brown

ADVANTAGES:

Protective film for maximum protection
Easy to handle and apply.
Controls corrosion of both ferrous and non-ferrous metals.
Controls scale deposits
One package ready to use liquid treatment
Effective over pH 7-8
Low cost treatment

DOSAGES:


The treatment should be used in sufficient quantity to maintain 9-11 PPM as phosphonate. Feed rate is 0.75-1.0 Lb. / 1000 gallons of make-up water. The level of the treatment should be 2 Lb. /1000 in the first two weeks in order to establish the protective film and clean the system. Adjustments in dosages can be made on the basis of plant analyses performed with simple test equipment. Consult Your Thermidaire Water Treatment consultant for the proper dosage.

FEEDING:

Thermidaire Coltreat 304
should be introduced into the system continuously. Automatic bleeding and feeding system must be used.
.
HANDLING:

Thermidaire Coltreat 304
Alkali, acidic, relatively mild material, avoid contact with eyes and skin, should contact occur, flush with water. If discomfort persists, seek medical attention. Do not take internally. Do not freeze, store at moderate temperature. Keep container closed at all times.

Read Material Safety Data Sheet for detailed handling and storage precautions.

PACKAGING:

Thermidaire Coltreat 304
is packaged in 5 gallons pails, 45 gallons drums.

Home - Contact - About us - Products - Services - Policy - Forms - Info - Site Map - Search

Add this site to your favorites

Copyright 2003, Thermidaire Corporation Canada Limited. All rights reserved.