Fuel Oil Treatment
Thermidene A 400
403-400

PRODUCT USES:

Thermidene A 400 is a combustion catalyst reducing the facial surface tension of the oil resulting in a complete combustion, less carbon, soot, gums, etc.

Thermidene A 400 absorbs the water collected from the tank sweating and condensate entrained in the air from the breather

Thermidene A 400 involves the addition of a chemical additive, which provides corrective, preventive, efficient, and economical treatment for the entire fuel oil system from tank to burner.

DESCRIPTION:

Physical state: Liquid
Colour: clear light purple

BENEFITS:

Aids in preventing corrosion
Effective combustion booster.
Cleans the entire oil system of soot and slag deposits.

DOSAGES:

Initial dosage: 1 gallon of Thermidene A 400 for each 1,000 gallons of oil in the tank.
Continuous dosage: 1 gallon of Thermidene A 400 for each 3,000 gallons of oil in the tank.
If water is excessive, pump water from the bottom of the tank as much as possible, then add 1 gallon of Thermidene A 400 for each 500 gallons of oil in the tank.

FEEDING:

The best results are obtained where Thermidene "VS" is put into the lines or storage tank just prior to delivery. The optimum treatment level for any plant will be specified by Thermidaire Corporation.

HANDLING:

Thermidene A 400 is a harmful product, causing severe skin, eye, and respiratory tract damages.
Avoid breathing mist, avoid contact with clothing, eyes and skin, should contact occur, flush immediately with plenty of fresh water. If discomfort persists, seek medical attention. Do not take internally. Wear protective clothing, safety shoes, glasses, goggles Keep out of ignition sources. Store in a cool, dry and well-ventilated places. Keep container tightly closed. Avoid contact with oxidizers. Wash thoroughly after handling.

SPILL PROCEDURES:

Extinguish all ignition sources. For small spills wipe out and dispose in waste containers. For large spills contain by diking with soil or other non-combustible absorbents and dispose in waste containers. keep out of sewers, surface waters, and soil. Local effluent regulations must be observed.

Read Material Data Sheets before handling this product.

PACKAGING:

Thermidene A 400 is packaged in 5 gallons pails, and 45 gallons drums.