PRODUCT USES:

Thermidaire Thermize 610 Non-toxic. Non-foaming multi purpose high molecular weight polymeric materials and functions in water as a polyelectrolyte. When mixed with mud, the positively charged polymer particles attract the negatively charged mud particles of both colloidal and above colloidal size. The charge thus becomes neutralized and large agglomerates build up. This results in massive flock particles, which having a larger surface than the fine mud particles, do not compact together.
Thermidaire Thermize 610 is a cationic-based compound used for mud and oxides removal. It is high molecular weight, polymeric material functioning as a polyelectrolyte causing an agglomeration of the particles and in effect more flocculent, looser mud easy to remove by blow down. Thermize is widely used for heating and cooling systems.
Thermidaire Thermize 610 normally used along with boiler water treatment program or for thorough cleaning of the system during the shutdown period. Thermidaire Thermize 610 Used as industrial cleaner and dispersant designed for use in steam boilers systems for the removal of mud, solids, silt, and oxides Takes the stickiness out of mud and sediments, under many water quality conditions preventing suspended solid from adhering to heat exchange surfaces.
Thermidaire Thermize 610 has been utilized to provides dispersant properties and hold a variety of different Suspended solids in suspension for easy removal.
Thermidaire Thermize 610 while maintaining clean heat transfer, tower fill and other critical areas, acting at the same time as penetrating aid for micro Biocides, allowing efficient kill even under slime masses.

DESCRIPTION:

Physical state: Liquid.
Colour: Colourless.

ADVANTAGES:

Non-toxic. Non-foaming.
Increases heat transfer efficiency.
Aids in reducing under-deposit corrosion
Aids in reducing scale
Maintains clean system free of suspended solids, mud, silt, and oxides.
Cleans fouled systems while in operation.
Low cost cleaner, easy to use.

DOSAGES:

Thermidaire Thermize 610 Add 2-3 gallons to the boiler water, maintain water temperature below 170 f. circulate the water for 2-4 hours, drain the boiler, fill with fresh water, drain and fill with fresh water. Add the treatment. Adjustments in dosages can be made depending on the condition of the boiler. Consult Your Thermidaire Water Treatment consultant for the proper dosage.

FEEDING:

Thermidaire Thermize 610 can be introduced into the through the manhole.

HANDLING:

Avoid contact with eyes and skin, should contact occur, flush with water. If discomfort persists, seek medical attention. Do not take internally. Do not freeze, store at moderate temperature. Keep container closed at all times.

Read Material Safety Data Sheet for detailed handling and storage precautions.

PACKAGING:

Thermidaire Thermize 610 is packaged in 5 gallons pails, 45 gallons drums.

Click Her For More Product Information