PRODUCT USES:

Thermidaire Phtreat 102 is a liquid blend of alkaline material based on sodium hydroxide and sodium salts, designed for use in systems containing waters of low pH and low, medium and high hardness.
Thermidaire Phtreat 102 primarily intended to increase the pH to proper range for good corrosion control, and can also be used where acidic waters require pH adjustment and where acidic wastes must be neutralized prior to discharge. In addition, it can be used for alkalinity control in steam boilers and cooling towers.

DESCRIPTION:

Physical state: Liquid
Color: clear to hazy yellow

BENEFITS:

Increases alkalinity to desired levels
Neutralizes acidic water
Liquid form for easy handling
Aids in preventing corrosion
Partial return line corrosion protection
No carry over
Safer than powders.

DOSAGES:

Requirements will vary depending on the nature of the make up water, the type of system, The treatment dosage should be adjusted to the desired reading of pH, average dosage is 100-150 ml. / 1000 imperial gallons (1250 US gallons) of make up volume to maintain pH value of 9-10. Adjustments in dosages can be made on the basis of plant analyses performed with simple pH test Your Thermidaire Water Treatment Consultant will establish the proper dosage.

FEEDING:

Continuous feeding by chemical metering pump is recommended. The treatment should injected to the deaerator storage section. Shot feeders can be used.

HANDLING:

Thermidaire Phtreat 102 is a strong alkali that can cause serious burns, avoid breathing mist, avoid contact with clothing, eyes and skin, should contact occur, flush immediately with plenty of fresh water. If discomfort persists, seek medical attention. Do not take internally.
Keep closed at all times

Read Material Data Sheets before handling this product.

PACKAGING:

Thermidaire Phtreat 102 is packaged in 5 gallons pails, and 45 gallons drums.