|
Organic
Water Treatment
Chemicals
Steam Boilers,
Cooling Towers,
Hot And Chilled
Closed Systems
Fuel Oil Treatment
(Home of D.M
Concentrate)
COOLING
TOWERS SCALE AND CORROSION
INHIBITOR
All
Organic
Thermize
Plus C Supreme 608
405-608
PRODUCT USES:
Thermidaire Thermize Plus C
Supreme 608 specially developed organic blend to provide full protection in extreme
conditions against corrosion
and scale in cooling towers
and works as a dispersant
agent
Thermidaire Thermize Plus C Supreme 608 corrosion and scale inhibitor based on several different organic and
cationic products used for
open cooling systems. Thermize
Plus C also prevents the
formation and growth of
certain types of algae, slime,
and bacteria
Thermidaire
Thermize Plus C Supreme 608 specially
compounded product with
several different organic and
cationic ingredients used for
cooling systems as a scale and
corrosion inhibitor. Inhibits
corrosion in all parts of the
system.
Thermidaire
Thermize Plus C Supreme 608 prevents
the formation and growth of
algae, slime, bacteria, etc.,
carried in as air-born
bacteria with the wind. Should
be used with an effective
biocide treatment to control
the more stubborn forms of
algae, slime, and bacteria
Thermidaire
Thermize Plus C Supreme 608 recommended
to be used in hard waters and
difficult conditions.
DESCRIPTION:
Physical
state: Liquid.
Color:
light brown, clear.
ADVANTAGES:
Increases the cycle of
concentration
Provides full protection in
extreme conditions
Dispersant agent
Increases
heat transfer efficiency.
Inhibits
scale formation in cooling
waters and corrosion of all
metals.
Prevents
deposition of hardness salts.
pH
control not required
Gradually
removes existing corrosion
debris.
Low
toxicity. Non-foaming.
Simple
control test.
May
be dosed directly from the
treatment drum as supplied.
Low
cost, easy to use.
DOSAGES:
Thermidaire Thermize Plus C Supreme 608 The optimum treatment level will be specified by Thermidaire Corporation
according to the operating
conditions, such as:
pH hardness of water,
temperature, mechanical design
of the system, and
recalculation factor. Average
dosage: 4 oz. (125 ml) for
each 1250 US gallons of
make-up water or 40 oz (1.14
liter) per day, per 100 tons,
operating 16 hours.
FEEDING:
Thermidaire Thermize Plus C
Supreme 608 should
be introduced into the system
continuously. Automatic
bleeding and feeding system is
required.
HANDLING:
Alkaline
solution. (Non-hazardous) Avoid
contact with eyes and skin,
should contact occur, flush
with water. If discomfort
persists, seek medical
attention. Do not take
internally. Do not freeze,
store at moderate temperature.
Keep
container closed at all times.
Read Material Safety Data
Sheet for detailed handling
and storage precautions.
PACKAGING:
Thermidaire Thermize Plus C Supreme 608 is packaged in 5 gallons pails, 45 gallons drums
|
Product
Information
