|
Organic
Water
Treatment
Chemicals
Steam
Boilers,
Cooling
Towers,
Hot And
Chilled
Closed
Systems
Fuel Oil
Treatment
(Home
of D.M
Concentrate)
BOILER
SCALE CONTROL
Sclteat
403
500-403
PRODUCT
USES:
In boiler
systems,
steam demands
vigilant
maintenance
and sophisticated
water treatment
needs. Scale
formation,
common at
the intense
temperature
reached
in boilers,
can weak
the system,
overheating
tubes, which
may eventually
fail.
Thermidaire
Sclteat403,
is a blend
of
selected
scale inhibitors
and dispersant
for low
pressure
boilers
<125
PSI, formulated
to
precipitate
calcium
hardness
in the boiler
as sludge
and prevent
formation
of hard
calcium
carbonate,
silicate,
and sulfate
scale. Contains
silica to
assure precipitation
of magnesium
as fluid
sludge.
Thermidaire
Sclteat403
dispersion
qualities
are employed
moderating
the phosphate
sludge created
by diminishing
the sediment
ability
to adhere
the sludge
remains
suspended
in the boiler
water until
removed
by the blow-down.
Thermidaire
Sclteat403
contains
the best
and most
highly concentrated
blend of
selected
phosphates
to assure
maximum
results
with minimum
treatment.
DESCRIPTION:
Physical
state: liquid
Colour:
Brown
ADVANTAGES:
- Reacts with feed water hardness
and prevent scale deposits
even in high hardness water.
- Forms suspended, none adherent
sludge.
- Cost effective product.
- Simple dosage and testing
procedures.
DOSAGES:
Thermidaire Sclteat403 requirements
are in direct proportion to
the chemical characteristics
of the makeup water, boiler
operations, percentage of condensate
return, etc. A 30-50 PPM residual
of phosphate should be maintained
in the boiler .
Your Thermidaire
Water Treatment Consultant will
provide you with the correct
dosage.
Dosage is controlled by a simple
colour comparison test.
FEEDING:
Thermidaire Sclteat403 can
fed in a number of ways
depending upon the makeup water
characteristics and the boiler
operations. Can be mixed and
fed with other boiler water
treatment chemicals. Continuous
feeding by chemical metering
pump is recommended. The treatment
should injected to the deaerator
storage section. Shot feeders
can be used.
HANDLING:
Alkaline material. When
handling, avoid contact with
skin and eyes. Should contact
occur, flush immediately with
water. Avoid breathing dust
and vapor. Do not take internally.
If discomfort persists,
seek medical attention. Keep
container tightly closed in
cool, dry place.
Read Material Data Sheets before
handling this product.
PACKAGING:
Thermidaire Sclteat403 is
packaged in 5 gallons pails
and 45 gallons drums.
|
Product
Information
