Products Menu       
FAQ Site Map Search Tools
Environment FriendlyAsk ExpertsABChemicals

  Product Information   


Organic Water Treatment Chemicals
Steam Boilers, Cooling Towers, Hot And Chilled Closed Systems
Fuel Oil Treatment
(Home of D.M Concentrate)

BOILER SCALE CONTROL
Sclteat 404
500-404

PRODUCT USES:

In boiler systems, steam formation demands vigilant maintenance and sophisticated water treatment needs. Scale formation, common at the intense temperature reached in boilers, can weak the system, overheating tubes, which may eventually fail.

Thermidaire Sclteat404, is a blend of  selected scale inhibitors and dispersant for medium  pressure boilers 100-600 PSI, formulated to  precipitate calcium hardness in the boiler as sludge and prevent formation of hard calcium carbonate, silicate, and sulfate scale. Contains silica to assure precipitation of magnesium as fluid sludge.

Thermidaire Sclteat404 dispersion qualities are employed moderating the phosphate sludge created by diminishing the sediment ability to adhere the sludge remains suspended in the boiler water until removed by the blow-down.

Thermidaire Sclteat404 contains the best and most highly concentrated blend of selected phosphates to assure maximum results with minimum treatment.

DESCRIPTION:


Physical state: liquid
Colour: Brown

ADVANTAGES:

  • Reacts with feed water hardness and prevent scale deposits even in high hardness water.
  • Forms suspended, none adherent sludge.
  • Cost effective product.
  • Simple dosage and testing procedures.
DOSAGES:

Thermidaire Sclteat404 requirements are in direct proportion to the chemical characteristics of the makeup water, boiler operations, percentage of condensate return, etc. A 30-50 PPM residual of phosphate should be maintained in the boiler .

Your Thermidaire Water Treatment Consultant will provide you with the correct dosage. Dosage is controlled by a simple colour comparison test.

FEEDING:

Thermidaire Sclteat404 can fed in a number of ways depending upon the makeup water characteristics and the boiler operations. Can be mixed and fed with other boiler water treatment chemicals. A continuous feeding by chemical metering pump is recommended. The treatment should injected to the deaerator storage section. Shot feeders can be used.

HANDLING:

Alkaline material. When handling, avoid contact with skin and eyes. Should contact occur, flush immediately with water. Avoid breathing dust and vapor. Do not take internally. If discomfort persists, seek medical attention. Keep container tightly closed in cool, dry place.

Read Material Data Sheets before handling this product.


PACKAGING:

Thermidaire Sclteat404 is packaged in 5 gallons pails and 45 gallons drums.

Home - Contact - About us - Products - Services - Policy - Forms - Info - Site Map - Search

Add this site to your favorites

Copyright 2003, Thermidaire Corporation Canada Limited. All rights reserved.