Thermidaire Thermaclean 702 steam boilers cleaners despersant boil out mud remover

Organic Water Treatment Chemicals
Steam Boilers, Cooling Towers, Hot And Chilled Closed Systems
Fuel Oil Treatment
(Home of D.M Concentrate)

PRODUCT USES:

Thermidaire Thermaclean 702 is a non-caustic, powder degreasing and detergent, soluble in hot water, incorporating a blend of alkalis with suitable wettants.
Thermidaire Thermaclean 702 is non-corrosive to ferrous and non-ferrous metals. Extra care should be given when cleaning aluminum and its alloys.
Thermidaire Thermaclean 702 removes greasy and oil bound deposits from all surfaces and it is applied to condensers, oil coolers, engine and compressor water jackets, air coolers, engine parts lubricating the oil systems, pavement and concrete, and it is widely used for degreasing the new boilers and removing the oil contamination from the boiler, feed water lines.
Thermidaire Thermaclean 702 Used as industrial oil remover, cleaner and dispersant designed for use in steam boilers systems operating under many water quality conditions preventing oil and suspended solid from adhering to heat exchange surfaces.

DESCRIPTION:

Physical state: Powder
Colour: Light brown

ADVANTAGES:

- Removes greasy and oil bound deposits.
- Does not create objectionable odors.
- Non-corrosive to ferrous and non-ferrous metals.
- Effective general purpose degreasing, oil removal.
- Contains no phosphates or mercury.
- Easy to follow procedure.
- Increases heat transfer efficiency.
- Low cost cleaner, easy to use.

DIRECTIONS:

Thermidaire Thermaclean 702 powder should be dissolved in hot water at a temperature of approximately 150⁰F. The recommended dosage is 15 Lb. for each 200 gallons of water in the boiler and/or system. For other use, the solution concentration depends on the nature of the deposits and on the type of the plant (range 1-10%).
When cleaning aluminum or its alloys Thermidaire Thermaclean 702 should be used at ambient temperature and not more than 5% strength.

FEEDING:

Thermidaire Thermaclean 702 liquid form can be poured directly into the boiler through the manhole or valve cover opening, or circulated by an independent pump. The tank surfaces should be frequently scammed. Thermidaire Thermaclean 702 treatment should be followed by a hot water flushing procedure.

HANDLING:

Based on a blend of non-caustic alkalis. Avoid contact with eyes and skin, should contact occur, flush with water. If discomfort persists, seek medical attention. Do not take internally. Do not freeze, store at moderate temperature. Keep container closed at all times.

Read Material Safety Data Sheet for detailed handling and storage precautions.

PACKAGING:

Thermidaire Thermaclean 702 is packaged in 50 Lb. and 100 LB containers