Products Menu       
FAQ Site Map Search Tools
Environment FriendlyAsk ExpertsABChemicals

  Product Information    


Organic Water Treatment Chemicals
Steam Boilers, Cooling Towers, Hot And Chilled Closed Systems
Fuel Oil Treatment
(Home of D.M Concentrate)

BOILERS AND COOLING TOWERS DE-SCALING
Thermaclean 809

407-809

PRODUCT USES:

Thermidaire Thermaclean 809 is a strong mineral (inorganic) acid in liquid form designed to remove scale from those hard to get tubes in boilers, steam lines, condenser tubes, Recirculating systems such as hot water systems and Chillers, cooling towers, vessels and pipe lines.

Thermidaire Thermaclean 809 used as industrial descalant used to descale steel and copper.

Thermidaire Thermaclean 809 used for hard water lime scale (calcium carbonate) removal. these scales are readily and completely dissolved.

Thermidaire Thermaclean 809 maintaining clean heat transfer and other critical areas in the systems.

Thermidaire Thermaclean 809 does a better and cleaner job when used at temperatures between 120oF. and 140oF.  Temperatures above 160oF are to be avoided.

 DESCRIPTION:

Physical state: Solid granular
Colour: White.

ADVANTAGES:

Inhibited product
Increases heat transfer efficiency.
Lower fuel cost
Eliminate scale
Maintains clean system free of suspended solids, mud, silt, and oxides.
Low cost cleaner, easy to use.

DOSAGES:

Thermidaire Thermaclean 809 should be used in sufficient quantity to maintain pH reading of 1-2.  Usually 10% of the solution. Adjustments in dosages can be made depending on the nature of the contaminants and the operating condition of the system and the thickness of the scale. Consult Your Thermidaire Water Treatment consultant for the proper amount that should be used.

FEEDING:

Thermidaire Thermaclean 809 can be introduced into the system manhole, as needed depending on the nature of the contaminants and the operating condition of the system.

DIRECTIONS:

Equipment should be set up to circulate

Thermidaire Thermaclean 809 solution using a pump or steam jet ejector.  Introduce the solution at the lowest point of the equipment and return to mixing barrel from the top of the equipment being cleaned.  If circulation is not possible, soak the equipment over night or for 12 to 18 hours.  Rapid circulation has a greater affect on the rate of cleaning.

HANDLING:

Danger! Extremely Corrosive. Causes severe burns. Vapor extremely irritating. Wear protective clothing, boots, gloves, goggles, face shield and respirator and adequate ventilation. Avoid contact with eyes and skin, should contact occur, flush with water and seek medical attention. Do not take internally. Do not freeze, store at moderate temperature. Keep container closed at all times. is not injurious to skin or clothes.

Read Material Safety Data Sheet for detailed handling and storage precautions.

PACKAGING:

Thermidaire Thermaclean 809 is packaged in 4.5 gallons container, and in 52 gallons drum.

Home - Contact - About us - Products - Services - Policy - Forms - Info - Site Map - Search

Add this site to your favorites

Copyright 2003, Thermidaire Corporation Canada Limited. All rights reserved.