Simple to repair with few parts to replace and no gaskets
· An all position trap - vertical makes it freeze proof
· Compact - trap, strainer, check valve, air vent
· Fails open and safe safely relieves excessive pressure
· Resists dirt and self dealing with no water hammer or steam loss

Not A Throw-Away Can be normally repaired for less than half the cost of a new steam trap.

A miniature, light weight steam trap in stainless steel features the advantages of easy inspection and quick repair. A specially designed corrosion resistant thermostatic bimetal element offers immediate response to even the slightest temperature change.

Traps are factory set to discharge condensate at 180 to 210 degrees F. along the saturated steam curve from vacuum to 300 and 650 PSI.

When special applications require a different setting, a screwdriver can be inserted into the slotted valve head and with slight tightening of the lock nut, condensate temperatures can be sub-cooled even lower than 180 degrees P.

An adjustment in the opposite direction will increase the discharge up to 212 degrees F. with only the loss of flash steam.

The thermostat and valve are loosely assembled in the body of the trap. This flexibility permits the reverse seating check valve to rotate freely to prevent clogging of the orifice.

The types Land LS are universal steam traps useful not only for freeze protection on tracing and drip applications but also on a variety of installations.

SPECIFICATIONS

Type L & LS with Strainer Body & Trim Stainless Steel
Connections 1/4", 3/8", 1/2" 3/4", 1"

OPERATING RANGE

0 to 300 PSI @ 650⁰F.                              0 to 650 PSI @7500 F.
Orifice Size 1/4" & 1/2"                                            1/4"
Weight 12 ozs.                                                          18 ozs.
Dimensions Width 1 - 1/2"                                      1-3/4"

Consult your representative on a steam trap survey to improve efficiency and eliminate steam leaks.

HOW TO ORDER

Specify the following:

Pipe Connection, Type, Model & Orifice Size

Example - 314", Type NDS, Model 101 with 518" Orifice (314-NDS-101-5/8)

GUARANTEE

All Thermidaire steam traps are guaranteed unconditionally for three years against defective material and workmanship.